Free shipping on orders of $150 or more. Order online only. 40 lbs or less (Other conditions may apply).

Subscribe to our newsletter and receive $10 off your first order

Take advantage of our seasonal tool closeouts such as blowers with up to 30% off.

Drill

(72 products)

Every hole tells a story of precision. Our professional cordless drills from DeWalt, Makita, Milwaukee, and Fein deliver 50 to 140 Nm of torque through brushless motors designed to withstand the most demanding Quebec construction sites.

From the compact 18V drill driver for work in confined spaces to the magnetic drill press for structural steel, Polar Industrial Equipment has the right tool for your trade.

View as

Our recommendations

Similar Categories

Complete guide to choosing your professional cordless drill

Which torque should you choose for your professional drilling tasks?

Torque is the most important specification when choosing a professional cordless drill. It is measured in Newton-meters (Nm) or inch-pounds (in-lbs). Choosing the wrong torque range means either stripping fasteners on delicate materials or stalling the motor on demanding applications.

Compact 18V drill drivers in the 40 to 60 Nm range are ideal for electricians, finish carpenters, and plumbers working in confined spaces. Mid-range models from 60 to 90 Nm suit general contractors for framing, siding, and structural fasteners. High-performance hammer drills delivering 100 to 140 Nm are the standard for masonry anchoring, concrete drilling, and heavy steel fabrication.

All DeWalt XR, Makita LXT, and Milwaukee M18 FUEL models available at Polar Industrial Equipment clearly publish their torque specifications, with most professional models offering a two-speed gearbox. The first gear maximizes torque at low RPM, while the second optimizes drilling speed with reduced torque. Matching the gear to the application extends bit life and protects fastener heads.

Brushless or brushed motor: what's the concrete difference on the job site?

Every professional cordless drill in Polar Industrial Equipment's range features a brushless motor, and the distinction is crucial for anyone who uses their tools daily. A brushless motor eliminates the carbon brushes found in conventional designs. These brushes wear out through friction, require periodic replacement, and generate heat that reduces motor efficiency over time.

A brushless motor is electronically controlled, with no wearing mechanical components in direct contact. The result is a motor that runs cooler, delivers up to 57% more run-time per battery charge compared to an equivalent brushed model, and extends service life to well over a decade of intensive professional use.

DeWalt markets this technology as XR, Makita as BL motor, and Milwaukee as part of its M18 FUEL platform. For professionals who bill by the hour, the practical difference translates to fewer battery swaps, fewer motor failures, and consistent power from start to finish of the workday.

DeWalt, Makita, Milwaukee, or Fein: How to choose the right brand?

The choice between major professional drill brands depends as much on your existing tool fleet as on technical specifications. Battery platform consistency is the dominant argument for a professional who already owns several tools from a given brand.

DeWalt 20V MAX dominates in heavy construction with its FlexVolt ecosystem allowing batteries to automatically switch between 20V and 60V depending on the connected tool. Makita LXT 18V excels in its lightness, ergonomics, and catalog of over 425 tools sharing the same battery.

Milwaukee M18 FUEL stands out for its maximum torque and its 5-year manufacturer's warranty on FUEL tools, the longest on the Canadian professional market. Fein, a German precision brand, offers ASCD 18V drill drivers with the QuickIN quick-change accessory system, particularly valued in industrial settings and automotive mechanics.

Équipement Industriel Polar distributes all four of these brands with local Quebec stock for fast delivery.

Hammer drill or rotary hammer: which application requires which?

The confusion between hammer drills and rotary hammers is common in the field, but the distinction is important for the results achieved and the tool's lifespan.
A hammer drill combines standard rotation with a mechanical axial striking mechanism, producing 30,000 to 34,000 blows per minute.

It is ideal for drilling into brick, concrete blocks, and light to medium-density masonry. The recommended diameter remains under 13 mm to preserve the drill bit and the tool. The Makita DHP486Z and DeWalt DCD996 are prime examples.

An SDS-Plus or SDS-Max rotary hammer is designed for reinforced concrete, dense foundations, and demolition applications. Its electro-pneumatic mechanism generates an impact energy of 1.5 to 3.0 joules, far superior to a hammer drill.

For anchoring structures, installing chemical anchors in high-density concrete, or drilling holes larger than 16 mm in concrete, the rotary hammer is the only appropriate professional choice.

Ergonomics and battery compatibility: the decisive criteria when buying a drill

A cordless drill used several hours a day must be evaluated for its ergonomics as much as its power. Weight is the first factor to consider: compact brushless drills weigh between 1.4 and 1.8 kg without a battery, while high-performance models reach 2.2 to 2.5 kg. Over a full workday, this difference of 400 to 800 grams becomes significant for wrist and elbow fatigue.

The length of the tool is also critical for confined spaces. DeWalt 20V XR and Makita 18V compact drills measure between 155 and 175 mm in overall length, allowing for use in electrical boxes, suspended ceilings, and wall cavities. Some models integrate a spirit level, a three-position LED light, and a battery charge display on the tool – three features that improve precision and productivity on the job site.

Battery compatibility remains the most defining criterion for a professional who already owns a fleet of tools. Polar Industrial Equipment offers all drills as tool-only versions for compatible users, and as complete kits with 5.0 Ah batteries and a fast charger for new platforms.
DeWalt drills Makita drills Milwaukee Drills FEIN drills Impact drills Screwdrivers DeWalt screwdrivers Makita screwdrivers DeWalt 20V Batteries

Answering your questions about professional cordless drills

Which cordless drill should I choose between DeWalt 20V, Makita 18V and Milwaukee M18 for professional use?

All three platforms deliver excellent performance for daily professional use. DeWalt 20V MAX excels in heavy construction and benefits from FlexVolt compatibility. Makita 18V LXT stands out for its light weight, ergonomics and ecosystem of over 425 interchangeable tools.

Milwaukee M18 FUEL offers the highest torque in its category and the longest manufacturer warranty on the market with 5 years on FUEL tools. The best choice is the one that matches the battery platform you already own.

Should I choose a hammer drill or a standard drill driver for general construction work?

For general construction in Quebec, a hammer drill is strongly recommended. It combines standard rotation for wood and metal with a percussion mode for concrete and masonry, eliminating the need for a separate rotary hammer.

The DeWalt DCD996 and Makita DHP486Z deliver up to 34,000 and 31,500 blows per minute respectively in hammer mode, sufficient for the vast majority of structural anchoring applications on active jobsites.

Is it better to buy a tool-only drill or a complete kit with batteries and charger?

If you already own compatible batteries (DeWalt 20V, Makita 18V LXT or Milwaukee M18), buy tool-only and save between $80 and $150.

All these platforms are fully backward compatible. If you are starting fresh with a new brand, the complete kit with two 5.0 Ah batteries and a rapid charger represents the best value for being fully operational from day one on the jobsite.

What is the difference between a drill driver and an impact driver?

A drill driver uses a continuous torque output controlled by an adjustable clutch, ideal for precise drilling and fastening in wood, metal and light masonry.

An impact driver generates rapid rotary impacts at 3,000 to 4,000 blows per minute to deliver 100 to 200 Nm of torque for dense structural assemblies.

For maximum versatility, most professionals own both tools running on a shared battery inventory.

How long does a brushless drill last compared to a brushed model?

A brushless motor typically lasts two to three times longer than a conventional brushed motor.

With no mechanical wear parts in direct contact, the brushless motor requires no specific maintenance throughout its service life, which can exceed 10 years of intensive professional use.

For a professional using their drill daily, the initial premium of a brushless model is far outweighed by the elimination of brush replacement costs and unexpected motor failures.

CAN'T FIND THE PRODUCT YOU'RE LOOKING FOR?

CONTACT US

Compare /8