Free shipping on orders of $150 or more. Order online only. 40 lbs or less (Other conditions may apply).

Subscribe to our newsletter and receive $10 off your first order over $150.

Take advantage of our seasonal tool closeouts such as blowers with up to 30% off.

Makita sandblasters

(15 products)

Makita belt and orbital sander for professional stripping and finishing. 3in x21 and x24 variable speed belts, 6in orbital for curved surfaces. Over 30 accessories: Starlock triangle pads, wood, paint, stone and glass abrasive discs in various grits.
View as

Our recommendations

Similar Categories

Complete guide to choosing your Makita sander and accessories

Which Makita sander should you choose for your project?

The 9903 belt sander offers variable speed to adjust stripping aggressiveness by material, from soft wood to thick paint, with a 3in x 21in abrasive belt that's easy to replace.

The 9920 belt sander (3x24) suits larger surfaces with a powerful motor for fast stripping, while the 6in BO6050J orbital delivers a circular motion for mark-free finishes on wood and composites.

What accessories and abrasive discs fit your Makita sander?

Starlock triangle pads fit multi-tools and detail sanders to reach corners and tight spots, with grits from 20 to 1200 depending on the material: wood, paint, stone or glass.

A 60 to 100 grit works for rough paint stripping, 120 to 240 for intermediate wood sanding, and 400 to 1200 for a polished finish on stone and glass before sealing.

Stripping vs sanding: how to choose the right technique

Stripping quickly removes paint, varnish or rust with a coarse grit and a belt sander, exposing the bare surface in just a few passes on wood or metal.

Finish sanding then refines the surface with progressive grits up to 220 or higher, preparing the material for stain, varnish or paint with a smooth, even finish.

Professional applications: contractors, cabinetmakers and restorers

Renovation contractors use the 3in x 24in belt to strip floors and decks before refinishing, with a dust bag that cuts down cleanup between passes.

Cabinetmakers and furniture restorers favor fine triangle pads for moldings and tight corners, where a standard sander can't reach without damaging carved details.

Maintaining your Makita sander and replacing consumables

Replace the belt or abrasive pad as soon as it loses its bite, typically after 4 to 8 hours of intensive use depending on grit and material sanded.

Empty the dust bag after every project and keep a spare set of pads in stock to avoid jobsite delays, especially for fast-wearing fine grits.
Makita Sanders Makita 18V Cordless Drill Makita Grinders Makita circular saws Makita chainsaws Makita 18V Battery Makita chargers Makita hedge trimmers

Your questions about Makita sanders, answered

What is the difference between a Makita sander and a Makita sandblaster?

In Canada, both terms are often used interchangeably for the same type of tool. A belt sander removes material quickly with a continuous abrasive band, while an orbital sander refines a surface with a gentler circular motion. Our range covers both needs, from rough stripping to fine finishing.

What grit should I choose for my Makita sander?

A 60 to 100 grit works for rough stripping of paint or varnish. A 120 to 240 grit is used for intermediate sanding of wood. A 400 grit and above gives a polished finish on stone, glass or metal.

Are Makita triangle pads compatible with all models?

Starlock-type triangle pads fit oscillating multi-tools and detail sanders compatible with that attachment system. Check your tool's model before purchasing to confirm attachment compatibility.

Which Makita sander works best for stripping a wood floor?

The 3-inch x 24-inch belt sander provides the power needed to quickly remove an old finish on large flat surfaces, with an abrasive belt that can be replaced in seconds.

Is Makita a good sander brand?

Makita has manufactured power tools in Japan for over 100 years and equips most professional contractors across Canada thanks to the reliability of its motors and the steady availability of parts and accessories.

How do I extend the life of my Makita sander?

Empty the dust bag regularly, replace the belt or pad as soon as it loses its bite, and avoid applying excessive pressure that overheats the motor and prematurely wears the drive mechanism.

CAN'T FIND THE PRODUCT YOU'RE LOOKING FOR?

CONTACT US

Compare /8