WELD-PAK 225I LINCOLN WELDER K5419-1

Lincoln Weld-Pak 225i Welder Contents

This package includes everything you need to start welding quickly, right out of the box.

Included in your order:

-Lincoln Weld-Pak 225i Welder (K5419-1): Dual voltage Stick and TIG welder, DC output up to 225A.
- Ground cable with clamp: to complete the welding circuit on your workpieces.
- Electrode cable: for Stick welding.
- Power cord: 120V and 230V compatible depending on the selected setting.

Product Advantages

Versatile dual voltage: switch from 120V to 230V depending on the available outlet, without additional equipment.
Integrated storage compartment: the top of the case serves to store cables and accessories, for a cleaner workstation.
Portability: at only 9 kg, this welder is easily transported from one job site to another.
Simple adjustment: the screen and single knob allow for quick parameter adjustment, even for the less experienced.

Recommended Additional Accessories

These accessories complement your Lincoln Weld-Pak 225i welder well for optimal use.
- Compatible mild steel electrodes (5/64 to 5/32 in), depending on your work.
- Auto-darkening welding helmet, sold separately.
- Gloves and protective clothing for arc welding, sold separately.

First Use

Before your first welding session, follow these simple steps.

1. Plug the welder into a 120V or 230V outlet depending on your needs and required power.
2. Install the electrode cable and ground cable to the appropriate terminals.
3. Select Stick or TIG mode and adjust the amperage according to the electrode used.
4. Perform a test weld on a scrap piece before starting your work.

Regular Maintenance

Simple maintenance extends the life of your welder.

After each use:
- Wipe the casing to remove dust and welding residues.
- Store the cables in the integrated storage compartment, without bending them excessively.
- Check the condition of the clamps and connectors before each new use.

Power voltage management:

Make sure the outlet used matches the 120V or 230V setting of the device.
- Avoid changing the input voltage while the welder is powered on.

Cleaning and Maintenance

1. Exterior casing: clean with a dry or slightly damp cloth, never use solvents.
2. Ventilation openings: dust with low-pressure compressed air to prevent overheating.
3. Connection terminals: check for corrosion and tighten as needed.

Precautions for Use

For your safety:
- Observe the indicated duty cycle: exceeding 30% at 225A on 230V may activate the device's thermal protection.
- Never block the device's ventilation openings.
- Always wear a welding mask and suitable gloves: the electric arc produces intense light and projections.
- Never modify the original wiring or internal components: this voids the manufacturer's warranty.

Storage Tips

Short-term storage:
- Store the welder in a dry, dust-free place, between jobs.

Winter storage in Canada:

-Avoid storing the device in an unheated area where humidity can accumulate inside the casing.
- Allow the welder to return to room temperature before using it after cold storage.

Polar Industrial Equipment Warranty Coverage

Polar Industrial Equipment offers a 30-day satisfaction guarantee on this purchase. You may return the device within this period if it does not meet your expectations.

Lincoln Electric Warranty Coverage

-Duration: 1 year on the Lincoln Weld-Pak 225i Welder (K5419-1).
- Gun and cable: 90-day warranty.
- Warranty type: parts and labor against manufacturing defects.
- Warranty applicable to purchases from an authorized Lincoln Electric retailer.

What is covered
- Manufacturing defects: any component defective from the factory.
- Internal electronic components: control and display circuits.
- Gun and cable: covered for 90 days against manufacturing defects.

What Lincoln Electric will do:
- Repair or replace defective parts.
- Provide technical support for remote diagnosis.

Warranty Exclusions
The warranty does not cover:
- Normal wear and tear: electrodes, cables, and connectors that wear out with use.
- Physical damage: drops, impacts, or breakage caused by improper handling.
- Misuse: exceeding the duty cycle or use not in accordance with the user guide.
- Extreme conditions: excessive humidity or exposure to excessive metal debris.
- Negligence: lack of basic maintenance or unauthorized modification of the device.

Claim Procedure

How to make a claim:

Step 1: Documentation
Keep your purchase invoice, the device's serial number, and a description of the problem encountered.

Step 2: Contact
Polar Industrial Equipment Customer Service (30-day returns):
- Phone: 1-800-567-3206
- Email: info@equipementpolar.com
- Address: 3425 Boulevard Wilfrid-Hamel, Canada
- Hours: Monday to Friday, 8 am to 5 pm

Lincoln Electric Canada Service (manufacturer's warranty):

Contact Lincoln Electric support via lincolnelectric.com for any claims related to the manufacturer's warranty.

Step 3: Return
Pack the device in its original packaging, with all included accessories, to avoid damage during transport.

Step 4: Processing
Processing time varies depending on the nature of the claim. Polar Industrial Equipment will follow up until complete resolution.