Cordless Hedge Trimmer DEWALT FLEXVOLT 60V MAX 26 in. (DCHT870B)

Contents of the DEWALT DCHT870B Hedge Trimmer

This tool is sold on its own, without a battery or charger. Here's what you'll receive.

Included in your order:

• DEWALT DCHT870B FLEXVOLT Hedge Trimmer: the tool body with its 26 in. hardened steel blade and brushless motor rated up to 3,400 strokes per minute.
• Protective Sheath: a rigid cover to protect the blade during storage or transport.

Advantages of the FLEXVOLT Hedge Trimmer

• FLEXVOLT Compatibility: 60V MAX* batteries also recharge on 20V MAX DEWALT tools, one battery fleet for your whole toolkit.
• Professional-Grade Cutting: the 26 in. blade covers more surface per pass, a real time-saver on long hedges.
• Savings at Purchase: sold tool only, ideal if you already own a compatible DEWALT 20V or 60V MAX battery and charger.
• Comfortable Use: the wrap-around handle reduces hand strain during extended trimming sessions.

Recommended Add-on Accessories

Since this hedge trimmer is sold tool only, these accessories complete your purchase:

• DEWALT FLEXVOLT 9Ah Battery DCB609-1: extended runtime for long trimming sessions, sold separately.
• DEWALT 20V/60V DCB606 6Ah Battery: compatible with this hedge trimmer and the full FLEXVOLT lineup, sold separately.
• DEWALT FLEXVOLT DCB118 Fast Charger: fast charging compatible with 20V and 60V MAX, sold separately.

First Use

Follow these steps before your first trim for a safe start.

1. Charge the battery: install a compatible DEWALT 20V or 60V MAX battery on the charger until fully charged before first use.
2. Inspect the blade: check that the teeth are intact and no packaging residue remains on the hardened steel.
3. Adjust your grip: hold the wrap-around handle at the most comfortable angle before starting.
4. Run a test cycle: start the tool without contacting a hedge to get familiar with the 3,400 strokes-per-minute speed.

Regular Maintenance

Simple upkeep after each use extends the life of the blade and motor.

After each use:

• Remove the battery from the tool
• Wipe the blade to remove sap and plant debris
• Store the tool in its protective sheath

Blade care:

• Regularly check the condition of the laser-cut teeth
• Apply a light rust-inhibiting lubricant after cleaning
• Tighten the blade screws if any play is noticed

Cleaning and Maintenance

1. Blade: wipe with a dry cloth after each use, remove sap with a mild solvent if needed.
2. Motor housing: clean with a slightly damp cloth, never submerge in water.
3. Vents: dust with compressed air to prevent the brushless motor from overheating.
4. Screws and fasteners: check tightness monthly during peak season.

Safety Precautions

For your safety:

• Never touch the moving blade: risk of serious injury.
• Do not use in the rain: risk of electronic damage and voided warranty.
• Remove the battery before any adjustment or cleaning: prevents accidental start-up.
• Wear gloves and eye protection: flying debris can cause injury.
• Keep children and pets at a distance: the blade remains dangerous even when stopped.

Storage Tips

Short-term storage:

• Protective sheath installed, in a dry spot away from direct sunlight.

Long-term storage:

• Clean and lubricate the blade before storing.
• Remove the battery and store it separately from the tool.

Winter storage in Canada:

• Store the tool and battery at room temperature, between 10 and 25 degrees Celsius, never in an unheated garage.
• Prolonged freezing can damage the battery and reduce its runtime the following season.

Équipement Industriel Polar Warranty Coverage

Every purchase from Équipement Industriel Polar is covered by a 30-day money-back guarantee. If the tool doesn't suit your needs, return it in its original condition for a full refund.

DEWALT Warranty Coverage

• 3-year limited warranty against defects in materials or workmanship.
• 1 year of free service including maintenance and replacement of worn parts.
• 90-day satisfaction guarantee offered directly by DEWALT on this model.

What's Covered

The manufacturer's warranty covers issues related to how the tool was built, not how it's used.

• Material defects: defective parts or components at the time of manufacturing.
• Manufacturing defects: faulty assembly or welding of the housing or motor.
• Brushless motor: premature failure unrelated to misuse.
• Original blade: hardening or laser-cutting defect found at the time of purchase.

What DEWALT will do:

• Repair the tool at no charge if the defect is covered.
• Replace defective parts with original components.

Warranty Exclusions

The warranty does NOT cover:

• Normal wear and tear: a dulled blade after extended use.
• Physical damage: drops, impacts, or a bent blade from contact with a rock or fence.
• Misuse: use on branches exceeding the recommended cutting capacity.
• Extreme conditions: use in the rain or storage in a humid location.
• Maintenance neglect: lack of regular cleaning of the blade and housing.

Claim Procedure

How to file a claim:

Step 1: Documentation

• Keep your original purchase invoice.
• Note the model number DCHT870B and the purchase date.

Step 2: Contact

Équipement Industriel Polar customer service (30-day returns):

• Phone: 1-800-567-3206
• Email: info@equipementpolar.com
• Address: 3425 Boulevard Wilfrid-Hamel, Québec
• Hours: Monday-Friday 8am to 5pm

DEWALT Canada Service (manufacturer warranty)

Step 3: Return pack the tool in its original packaging or equivalent, with the protective sheath on the blade, and ship it to the address provided by customer service.

Step 4: Processing standard processing time is 5 to 10 business days once the tool is received.