Sunex 4693 26-Piece Metric Deep Impact Socket Set, 3/4 in. Drive

Contents of the Sunex 4693 Impact Socket Set

This Sunex 3/4 in. impact socket set arrives complete: 26 metric deep sockets covering most bolts and nuts on trucks and heavy equipment.

Included in your order:

• 26 metric 3/4 in. deep impact sockets : 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 38, 40, 41, 42, 43, 44, 46 and 50 mm. Forged Cr-Mo steel, 6-point, black phosphate finish.
• Rigid storage case : blow-molded, it keeps all 26 sockets together for storage and transport.

Advantages of the Socket Set

• A full range from 19 to 50 mm : 26 sizes in a single kit, with no need to build the assortment piece by piece.
• Deep sockets : reach long-stud bolts and recessed nuts.
• Durable construction : forged Cr-Mo steel, black phosphate finish against corrosion and radius corners that reduce wear.
• Quick identification : sizes are laser-etched and permanently stamped.

Recommended Complementary Accessories

Complete your set with these 3/4 in. drive accessories:

• Jet 673903 4 in. 3/4 in. drive extension : extends the reach of your sockets in recessed areas, sold separately.
• Jet 673904 8 in. 3/4 in. drive extension : mid-length reach for hard-to-access bolts, sold separately.
• Jet 673905 16 in. 3/4 in. drive extension : long reach for axles and frames, sold separately.
• Milwaukee M18 FUEL 3/4 in. impact wrench (tool only) : cordless impact wrench with a 3/4 in. drive, sold separately.
• Makita 6906 3/4 in. impact wrench : impact wrench with a 3/4 in. drive, sold separately.

First Use

Before using your sockets for the first time:

1. Check the contents : make sure all 26 sockets are present and read the size markings.
2. Choose the right size : the socket must fit the nut with no play before you start impacting.
3. Use an impact tool : these sockets are designed for a 3/4 in. drive impact wrench.
4. Seat fully : push the socket fully onto the square drive before tightening or loosening.

Regular Maintenance

A few simple steps extend the life of your sockets.

After each use:

• Wipe each socket to remove grease, dirt and residue.
• Check for cracks or deformation.
• Return each socket to its place in the case.

Moisture management:

• Dry the sockets completely before storing them.
• Apply a thin film of light oil if the sockets are used in damp environments.
• Rinse and wipe promptly after contact with de-icing salt.

Safety Precautions

For your safety:

• Eye protection : wear them at all times when using an impact wrench.
• Damaged socket : stop using any cracked or deformed socket, as it can break under impact.
• Wrong size : an oversized socket rounds the nut and can slip.
• Right tool : use these sockets with a 3/4 in. drive tool only.

Storage Tips

Short-term storage:

• Keep the sockets in their case in a dry place.

Winter storage:

• Let the sockets return to room temperature before storing them to avoid condensation.
• Avoid leaving them in an unheated vehicle where moisture builds up.

Equipement Polar Warranty Coverage

Equipement Polar offers a 30-day money-back guarantee on this Sunex impact socket set.

Sunex Warranty Coverage

• Lifetime warranty : Sunex states a lifetime warranty on its impact sockets.
• Type : manufacturer warranty, subject to the terms published by Sunex.

What Is Covered

The Sunex warranty targets product defects. The detailed terms are those set by Sunex:

• Material defects : issues with the steel of the socket.
• Workmanship defects : defects present from the factory.
• Impact sockets in the set : the warranty covers the impact sockets.

What Sunex will do:

• Assess the claim according to its warranty terms.
• Repair or replace the socket found defective, according to its policy.

Warranty Exclusions

In general, a warranty of this type does NOT cover:

• Normal wear : worn markings or finish from regular use.
• Misuse : socket used with an unsuitable tool or size.
• Physical damage : impacts outside normal use, drops or modifications.
• Lack of maintenance : corrosion from prolonged damp storage.

See the full terms on the Sunex website before submitting any claim.

Claim Procedure

How to make a claim:

Step 1: Documentation Keep your purchase invoice and take photos of the affected socket.

Step 2: Contact

Equipement Polar customer service (30-day returns):

• Phone: 1-800-567-3206
• Email: info@equipementpolar.com
• Address: 3425 Boulevard Wilfrid-Hamel, Quebec City
• Hours: Monday to Friday, 8 a.m. to 5 p.m.

Sunex service (manufacturer warranty): see sunextools.com to submit a warranty claim.

Step 3: Return Pack the sockets in their case, with the original packaging if possible.

Step 4: Processing The time frame varies by claim type. You will receive an update once the sockets are received.