Peakworks® offers a wide range of anchoring systems, including: single-use/reusable roof anchors, sliding beam anchors, concrete hole anchors, and permanent anchors. These anchors can be attached to a variety of materials, such as steel, wood, and concrete, and must be placed directly above the worker to prevent swinging. All Peakworks® anchors are designed with a minimum tensile strength of 22 kN (5,000 lb).

• DESIGN – PeakWorks anchors and brackets can be connected to a variety of materials such as steel, wood, and concrete and must be located directly above the worker to prevent swinging.
• FEATURES – Designed with a minimum tensile strength of 22 kN (5,000 lb). They meet or exceed CSA Z259.15 and ANSI Z359.18 standards, as well as OSHA requirements.
• CAPACITY - Peakworks anchors have a weight capacity of 310 lb (141 kg) (combined weight of person, tools, clothing, etc.)
• OPTIONS - Temporary roof anchor brackets are available in 3 types - V8229001: Single-use roof bracket V8229100: Reusable roof anchor bracket V8229104: Reusable stainless steel roof anchor bracket
• The RB-9800 must be installed either on top of a roof or, if used on a flat roof, it must have a rated capacity of 5,000 lbs at the point of installation.