A torque wrench tightens a bolt to the exact value specified by the manufacturer. The choice rests on three criteria: the drive size, the torque range and the type of reading.
We compared 6 wrenches sold at Equipement Polar, from the 3/8 in. at $149 to the 3/4 in. at $956.76, using the ranges and accuracies published by the manufacturers. Prices are those of the product sheet at the time of writing.
Our Quick Picks
- Best price for the 1/2 in. drive → DeWalt DWMT75462: $170.29
- Best with calibration certificate → Jet 718912: $270.00
- Best digital → DeWalt DWMT17060: $295.00
- Best budget 3/8 in. → DeWalt DWMT75463: $149.00
- Tightest stated accuracy → Gearwrench 85062M: $190.00
- Best for heavy equipment → Jet 718918: $956.76
Comparison Table
| Model | Drive | Range | Type | Stated accuracy | Price |
|---|---|---|---|---|---|
| DeWalt DWMT75462 | 1/2 in. | 50 to 250 ft-lb | Micrometer click | Not specified | $170.29 |
| Jet 718912 | 1/2 in. | 50 to 250 ft-lb | Click | +/- 4% | $270.00 |
| DeWalt DWMT17060 | 1/2 in. | 50 to 250 ft-lb | Digital | Not specified | $295.00 |
| DeWalt DWMT75463 | 3/8 in. | 20 to 100 ft-lb | Micrometer click | Not specified | $149.00 |
| Gearwrench 85062M | 3/8 in. | 10 to 100 ft-lb | Micrometer | +/- 3% (clockwise, from 20 to 100% of range) | $190.00 |
| Jet 718918 | 3/4 in. | Up to 600 ft-lb | Click | +/- 4% | $956.76 |
See the full torque wrenches collection at Equipement Polar.
1. DeWalt DWMT75462
Best price for the 1/2 in. drive
The DWMT75462 is a 1/2 in. micrometer wrench covering 50 to 250 ft-lb, the range of wheel nuts and suspension hardware. A locking trigger keeps the setting once the torque is chosen.
Its dual-material handle and head bumper protect the hand and the tool. The manufacturer states it complies with ASME, ISO and TAA standards.
Pros
- I set the torque to the nearest ft-lb, thanks to a 1 ft-lb resolution
- The lowest price among the 1/2 in. wrenches in the selection ($170.29)
- The locking trigger keeps me from throwing off the value mid-job
Points to Consider
- The sheet does not publish an accuracy percentage, unlike the Jet 718912
- The 50 ft-lb minimum makes it unusable for small bolts
Ideal for: wheel nuts and general mechanics on a tight budget
Not ideal for: those who require a calibration certificate, see the Jet 718912
Price: $170.29
View the DeWalt DWMT75462 at Equipement Polar →2. Jet 718912
Best with calibration certificate
The Jet 718912 is factory calibrated with a certificate. Its reversible 24-tooth ratchet is made of chrome-vanadium steel.
Two scales, in foot-pounds and Nm, cover the manual's values in either unit. An audible click and a noticeable jolt signal that the torque is reached.
Pros
- I receive a calibration certificate with the wrench
- I read the torque in ft-lb or Nm without conversion
- It meets the ISO 6789 and ANSI standards
Points to Consider
- $270.00, which is $99.71 more than the DeWalt DWMT75462 with the same range
- Its +/- 4% accuracy is less tight than that of the Gearwrench 85062M
Ideal for: shops that must document the calibration of their tools
Not ideal for: occasional use on a small budget, see the DWMT75462
Price: $270.00
View the Jet 718912 at Equipement Polar →3. DeWalt DWMT17060
Best digital torque wrench
The DWMT17060 shows the torque on a backlit LED display. A button converts the value between foot-pounds, inch-pounds and newton-metres.
It comes with two batteries, a case and a manual. Its rubber-protected head makes it suited to tight spaces.
Pros
- I read the value on the display instead of counting on a click
- I change units with a single button
- Batteries, case and manual included
Points to Consider
- $295.00, the most expensive of the 1/2 in. wrenches
- Manufacturer warranty limited to 1 year
- It runs on batteries, which you need to keep in reserve
Ideal for: mechanics and equipment maintenance where you read the torque rather than wait for a click
Not ideal for: a shop without spare batteries, see the Jet 718912
Price: $295.00
View the DeWalt DWMT17060 at Equipement Polar →4. DeWalt DWMT75463
Best budget 3/8 in.
The DWMT75463 is a 3/8 in. micrometer wrench covering 20 to 100 ft-lb. A rubber bumper on the head protects it during use and if dropped.
It tightens in forward as well as reverse, and its quick-release trigger makes adjustment easier.
Pros
- The lowest price in the selection ($149.00)
- I tighten in both directions of rotation
- The hard case protects the wrench in the toolbox
Points to Consider
- The 100 ft-lb ceiling limits use on wheel nuts, whose specified torque may exceed it, see the DWMT75462
- The sheet does not publish an accuracy percentage
Ideal for: engine and accessory work in the 20 to 100 ft-lb range
Not ideal for: pickup truck wheels and heavy bolting, see the Jet 718918
Price: $149.00
View the DeWalt DWMT75463 at Equipement Polar →5. Gearwrench 85062M
Tightest stated accuracy in the selection
The Gearwrench 85062M shows a +/- 3% accuracy clockwise between 20% and 100% of its capacity. Its adjustment collar allows the torque to be changed quickly.
The knurled anodized aluminum handle reduces hand fatigue, and the midpoint marked on the handle helps you aim accurately. Its thin, sealed teardrop head improves access.
Pros
- I get the tightest published accuracy in the selection, +/- 3%
- I find the value faster with the quick-adjust collar
- It reaches down to 10 ft-lb, lower than the DeWalt 3/8 in.
Points to Consider
- $190.00, which is $41.00 more than the DeWalt DWMT75463
- The +/- 3% accuracy applies clockwise only
Ideal for: engine work and aluminum parts that call for a precise value
Not ideal for: wheel nuts on large vehicles, see the DWMT75462
Price: $190.00
View the Gearwrench 85062M at Equipement Polar →6. Jet 718918
Best for heavy equipment
The Jet 718918 goes up to 600 ft-lb with a 3/4 in. drive. The 3/4 in. models in the Jet range have a chrome-molybdenum steel ratchet, while the smaller ones use chrome-vanadium.
It offers the same ft-lb and Nm scales, the same patented retaining ring and the same molded case as the Jet 718912.
Pros
- It reaches 600 ft-lb, out of reach of the other wrenches in the selection
- I receive a factory calibration certificate
- It meets the ISO 6789 standard
Points to Consider
- $956.76, more than three times the price of the Jet 718912
- A 3/4 in. drive requires sockets and extensions in that size
Ideal for: maintenance of heavy equipment, axles and large-format bolting
Not ideal for: light vehicle work, see the DWMT75462
Price: $956.76
View the Jet 718918 at Equipement Polar →Need Help Choosing Your Torque Wrench?
Our team can advise you based on the torque in your manual and your budget. Free shipping in Canada on orders of $150 or more.
View all torque wrenches Contact our expertsHow to Choose Your Torque Wrench
The Drive Size
The drive size sets the reasonable torque range for a wrench. Each format is matched to a type of work.
- 1/4 in.: small torques, in inch-pounds.
- 3/8 in.: engines, accessories and small assemblies.
- 1/2 in.: wheels and suspension hardware.
- 3/4 in.: heavy equipment and large bolts.
The Torque Range
The value to tighten must fall within the wrench's range, and preferably far from its extremes. Gearwrench publishes the accuracy of the 85062M between 20% and 100% of its capacity, that is, from 20 to 100 ft-lb for this model.
A wrench that is too big for a small bolt loses accuracy. A wrench that is too small forces you to work near its limit.
Click, Digital or Dial
A click wrench signals the torque with a click and a jolt, like the Jet 718912. A digital wrench shows the value on a screen, like the DeWalt DWMT17060, and needs batteries.
The click type costs less and is checked by ear. The digital type is read by eye and adapts better to unit changes.
Accuracy and Standards
An accuracy of +/- 4% means the actual torque can deviate by 4% from the displayed value. At 100 ft-lb, that is 4 ft-lb more or less, versus 3 ft-lb for +/- 3%.
The ISO 6789 standard governs the design and verification of manual torque wrenches. The Jet wrenches and the Gearwrench in the selection comply with it according to their sheets.
Calibration
Many shops have their wrench checked every 12 months or after about 5,000 uses, and after a drop. This is a common industry practice, not a requirement of the standard.
Jobsite use justifies more frequent checks than occasional use in the garage.
Maintenance
Follow the manufacturer's manual for storage. In general, keep the wrench in its case and use it for tightening, not for loosening or as a lever.
How to Use a Torque Wrench in 6 Steps
- Read the value in the manual. The torque is in the vehicle or equipment manual, in the unit you need.
- Set the wrench. Turn the micrometer handle to the value, or select it on the screen of a digital model.
- Fit the socket. It must be the right size and fully seated on the bolt.
- Tighten in one smooth motion. Pull slowly, keeping your hand at the center of the handle.
- Stop at the signal. At the click or when the value shows, stop pulling.
- Store the wrench. Follow the manufacturer's instructions and put the wrench back in its case or pouch.
Converting Units
Product sheets show torque in foot-pounds (ft-lb) or newton-metres (Nm). One foot-pound is about 1.3558 Nm, and 12 inch-pounds make one foot-pound.
| Foot-pounds | Newton-metres (approx.) |
|---|---|
| 20 ft-lb | 27.1 Nm |
| 50 ft-lb | 67.8 Nm |
| 100 ft-lb | 135.6 Nm |
| 250 ft-lb | 339.0 Nm |
| 600 ft-lb | 813.5 Nm |
Unit mistakes are costly. Mixing up inch-pounds and foot-pounds multiplies or divides the torque by 12.
Torque Wrench, Impact Wrench or Torque Limiter
The torque wrench is the only one of these three options that measures the torque and signals it. An impact wrench applies a variable torque depending on battery charge, trigger duration and bolt condition.
- Impact wrench: fast for loosening, but it easily exceeds the target torque when tightening.
- Automatic shut-off modes: some models, like the Milwaukee 2855-22R, limit the torque to 20 ft-lb for hand-tight fasteners, which is far from a wheel's torque.
- Torque-limiting extensions: the Jet 682961 5-piece extension set caps the torque of an impact wrench, but only the torque wrench confirms the tightened value.
Which Wrench for Which Job
| Job | Recommended drive | Models in the selection |
|---|---|---|
| Car and light pickup wheels | 1/2 in. | DWMT75462, Jet 718912, DWMT17060 |
| Engine, accessories and small parts | 3/8 in. | DWMT75463, Gearwrench 85062M |
| Heavy equipment and large bolts | 3/4 in. | Jet 718918 |
The torque to apply always comes from the vehicle or equipment manual. You then choose the wrench whose range contains that value.
Mistakes to Avoid
- Choosing a wrench out of range: a value close to the wrench's minimum or maximum is less reliable.
- Continuing to pull after the click: stop as soon as the signal occurs.
- Using the wrench as a lever: it is for tightening, not for forcing a seized bolt.
- Dropping the wrench without rechecking it: a drop justifies a check before the next use.
- Mixing up units: ft-lb, in-lb and Nm do not mix.
- Ignoring calibration: a wrench whose condition is unknown no longer guarantees the tightened value.
What Budget to Plan For
- Under $200: the DeWalt DWMT75463 at $149.00, the DeWalt DWMT75462 at $170.29 and the Gearwrench 85062M at $190.00.
- $200 to $300: the Jet 718912 at $270.00 and the DeWalt DWMT17060 at $295.00.
- Over $900: the Jet 718918 at $956.76, for heavy equipment.
For wheels, expect between $170 and $295 with a 1/2 in. drive. To also cover small engine jobs, add a 3/8 in. wrench to the 1/2 in. wrench.
Our Verdict
For wheels and general mechanics: the DeWalt DWMT75462, at the best price for the 1/2 in. drive.
To document calibration: the Jet 718912, sold with its certificate.
To read the torque on a screen: the DeWalt DWMT17060.
For small, precise torques: the Gearwrench 85062M, or the DWMT75463 if budget matters.
For heavy equipment: the Jet 718918.