3-IN-1 COMPRESSOR (COMPRESSOR WELDER GENERATOR) 19 CFM 30 GALLON CI13GEH30-GENWD

Contents of the 3-in-1 Compressor

This unit comes as a single integrated unit combining the compressor, welder, and generator. Here's what's included in your order.

Included in your order:

CI13GEH30-GENWD compressor/welder/generator unit: The complete unit mounted on saddle feet with anti-vibration pads, ready for truck installation.

Onboard battery mounted and wired: No additional vehicle wiring required for starting.

Note: Welding rods, welding helmet, and other protective equipment are not included with the unit and are sold separately (see recommended accessories below).

Advantages of the 3-in-1 Compressor

Space-saving on the truck. A single unit replaces three separate units, freeing up cargo space on a service truck already cluttered with tools.

Simplified installation. The pre-mounted and wired battery on the unit reduces installation time and eliminates the need for an electrician for vehicle wiring.

Versatility on the job site. Compressed air, welding, and electricity are available in one place, without having to transport or start multiple separate engines.

Recommended Complementary Accessories

To take full advantage of the welding function of your 3-in-1 compressor, here are complementary accessories offered by Polar Industrial Equipment.

7018 3/32 in. welding rods, 2 kg pack: Arc welding consumable compatible with the unit's welding function, sold separately. Link: https://www.equipementpolar.com/products/rod-a-souder-7018-3-32-paquet-de-2kg

Viking 3350 Lincoln Electric welding helmet: Auto-darkening helmet for complete eye protection during welding, sold separately. Link: https://www.equipementpolar.com/products/lincoln-electric-casque-de-soudeur-viking-3350-noir-k3034-4

Wipeco F5W leather welding gloves: Heat-resistant gloves for safe handling of hot parts, sold separately. Link: https://www.equipementpolar.com/products/wipeco-f5w-gants-de-soudeur-cuir-de-vache-fendu-taille-unique

First Use

Before the first start-up, a few checks ensure safe and long-lasting operation of the appliance.

Step 1, Oil level check: check the compressor pump's oil level before any start-up.

Step 2, Mounting inspection: ensure that the saddle feet and anti-vibration pads are securely fastened before installation on the truck.

Step 3, Electrical check: confirm the correct connection of the on-board battery before the first start-up.

Step 4, Idling test: operate the appliance for a few minutes without load to ensure that the compressor, welder, and generator respond normally.

Regular Maintenance

Basic maintenance extends the lifespan of your appliance and maintains its performance.

After each use:

Allow the appliance to cool down before storing it.

Drain the air tank to remove accumulated moisture.

Visually inspect the belt guard and electrical connections.

Oil and lubrication management:

Check the pump's oil level at regular intervals.

Monitor the ball bearings and roller inserts on the connecting rods for any signs of wear.

Usage Precautions

For your safety:

Never use the welding function without appropriate protective helmet and gloves: risk of burns and eye injuries.

Never operate the appliance in an enclosed space without ventilation: the engine produces exhaust gases.

Never exceed the capacity of 210 amps in welding or 5500 watts in electrical generation: risk of overheating and damage to the appliance.

Never handle the pressurized air tank without proper prior draining: risk of injury.

Storage Tips

Short-term storage:

Store the appliance in a dry place and protected from bad weather between uses on the job site.

Winter storage in Quebec:

Store the appliance in a covered and ventilated place, protected from prolonged frost and direct humidity, like any combustion engine equipment and oil pump.

Polar Industrial Equipment Warranty Coverage

Every purchase from Polar Industrial Equipment is protected by a 30-day satisfaction guarantee. Our team supports you every step of the way.

Manufacturer's Warranty

This 3-in-1 compressor is a Polar Industrial Equipment brand product. The specific terms of the manufacturer's warranty on this model are managed directly by our team. Contact our customer service before purchase for the duration and conditions applicable to this device.

What Is Generally Covered

Our team evaluates each claim based on the nature of the problem. Categories usually covered by a manufacturing warranty on this type of device include:

Manufacturing defects: parts or assembly with an original defect.

Pump or motor failure: under normal use and in accordance with instructions.

Defective electrical components: observed upon delivery.

Air tank: compliant with applicable ASME standards.

What Polar Industrial Equipment will do:

Evaluate the claim with customer service.

Coordinate the replacement of the part or device if the warranty applies.

Warranty Exclusions

The warranty does not cover:

Normal wear and tear: consumables such as welding rods, nozzles, or pump wear parts.

Physical damage: shocks, drops, or improper handling during transport or installation.

Misuse: exceeding the 210 amp welding capacity or 5500 watt generation capacity, use not in accordance with instructions.

Extreme conditions: damage related to prolonged exposure to humidity or frost without adequate protection.

Negligence: lack of basic maintenance, such as tank purging or oil level checking.

Claim Procedure

How to make a claim:

Step 1, Documentation: keep your proof of purchase, model number CI13GEH30-GENWD, and photos of the problem observed.

Step 2, Contact

Polar Industrial Equipment Customer Service (30-day returns): Phone: 1-800-567-3206. Email: info@equipementpolar.com. Address: 3425 Wilfrid-Hamel Boulevard, Quebec. Hours: Monday-Friday 8am-5pm.

Step 3, Return: follow the instructions provided by our team for safe packaging and shipping of the device.

Step 4, Processing: our team evaluates the claim and informs you of the applicable processing time.