Free shipping on orders of $150 or more. Order online only. 40 lbs or less.

Subscribe to our newsletter and receive $10 off your first order

Take advantage of our seasonal tool closeouts such as blowers with up to 30% off.

Extractors

(41 products)

When controlled force meets mechanical precision. Our Sunex, OTC, and Powerbuilt bearing pullers remove stubborn bearings and seized hubs without damaging expensive parts.

From Quebec mechanical workshops to commercial fleets, equip yourself with tools that transform impossible disassemblies into smooth and safe operations. Because every stuck bearing deserves an extraction that preserves the integrity of your machinery and the profitability of your interventions.

View as

Our recommendations

Similar Categories

Complete guide to choosing your professional bearing puller

What type of bearing puller should I choose based on capacity and application?

The choice of bearing puller depends directly on the size of the bearings, their degree of jamming, and the frequency of use. Manual pullers with fixed or adjustable jaws are suitable for light bearings from 10 to 150 mm in diameter with pulling capacities from 500 to 5000 lbs.

These models, costing $20 to $250, are excellent for workshops performing occasional maintenance or working on light equipment.
Mechanical screw pullers develop forces of 2 to 10 tons for medium to heavy bearings in industrial motors, gearboxes, and agricultural equipment.

A worm screw mechanism offers progressive control of the applied force, avoiding sudden shocks that could damage shafts or housings. The price of $150 to $600 is justified by versatility and professional durability.

Hydraulic pullers generate forces of 10 to 30 tons for the most demanding applications, including heavy truck bearings, mining equipment, and massive industrial machinery. A manual or motorized hydraulic pump applies uniform pressure, eliminating excessive physical effort.
An investment of $600 to $1499 is quickly amortized in workshops performing daily extractions on heavy equipment.

Polar Industrial Equipment advises selection based on usage frequency and the range of bearing diameters handled.

2-Jaw vs. 3-Jaw Puller: Understanding the Key Differences

2-jaw pullers are suitable for bearings, sprockets, and hubs with clear access on two opposite sides, allowing for symmetrical claw positioning. A simple configuration facilitates quick installation with forces distributed over 180 degrees. Ideal for confined spaces where a third jaw cannot be physically positioned.

Prices are generally 20 to 40% lower compared to 3-jaw models of equivalent capacities.
3-jaw pullers offer superior stability, distributing forces over 120 degrees for more balanced extraction, reducing the risk of tilting or deformation.

The triangular configuration maintains critical automatic centering for precision bearings and expensive components. Increased versatility allows for the extraction of irregular or partially accessible parts, which is impossible with a 2-jaw configuration.

For various professional applications, experienced technicians generally keep both types in inventory. 2-jaw pullers excel for quick work on standard equipment, while 3-jaw pullers dominate in precision and versatility on complex machinery. Complete kits including interchangeable 2 and 3-jaw arms offer maximum flexibility for 300 to 800 dollars depending on capacities.

Polar Industrial Equipment recommends evaluating the diversity of your equipment fleet to determine the optimal configuration.

Advanced Extraction Technologies: Sunex, OTC, and Powerbuilt Systems

Sunex Tools specializes in high-capacity hydraulic pullers (10 to 30 tons) with two-speed hydraulic pumps that accelerate initial positioning then apply maximum controlled force. Their interchangeable jaw systems adapt to diameters from 50 to 400 mm, covering 90% of common industrial applications. Heat-treated forged steel construction guarantees a 15 to 20-year lifespan in intensive daily professional use.

OTC Tools develops mechanical screw pullers with patented anti-recoil mechanisms preventing sudden release of tension that can cause accidents. Their self-gripping serrated jaw claws maintain a firm grip on oxidized or oily surfaces without slipping.

A full range of accessories, including adapters for vehicle hubs, ball joint separators, and gear pullers, extends versatility beyond standard bearings.

Powerbuilt offers combined pullers integrating extraction, separation, and pressing functions into multifunctional tools, saving space and investment. Their modular systems accept universal accessories compatible with competing pullers for maximum flexibility. ASME and CSA certifications guarantee compliance with North American industrial safety standards.

Polar Industrial Equipment stocks replacement parts and accessories for all major brands, minimizing maintenance downtime.

Professional applications: industrial maintenance and commercial fleets

Industrial maintenance workshops require versatile extractors for dismantling centrifugal pumps, electric motors, speed reducers, and industrial fans. Bearings from 20 to 200 mm seized by corrosion, overheating, or excessive vibrations require forces of 2 to 15 tons for extraction without damaging costly shafts.

Intervention frequency of 5 to 20 extractions per week justifies investment in professional hydraulic extractors, reducing intervention time by 40 to 60% compared to manual methods. Commercial truck fleets face regular dismantling of wheel hubs, transmission bearings, and differential components during preventive maintenance and repairs.

Extra-long claw extractors from 300 to 500 mm access deeply recessed hubs inaccessible to conventional tools. Capacities of 15 to 30 tons are needed for hubs seized by winter de-icing salt, typical of Quebec conditions.

Agricultural equipment workshops require robust extractors for machinery exposed to dust, mud, and abrasive conditions. Bearings on combine harvesters, tractors, and irrigation equipment wear out quickly, requiring frequent replacements.
Complete kits including claws, adapters, and various accessories covering a wide range of diameters optimize versatility.

Polar Industrial Equipment advises professionals on selecting configurations based on specialization and annual intervention volumes.

Safety and Maintenance: Best Practices for Bearing Removal

Safety during bearing extraction requires mandatory wearing of impact-resistant safety glasses and abrasion-resistant gloves to prevent injuries from metallic particle projections and cuts from sharp edges. Position the extractor perpendicular to the shaft, checking the alignment of the jaws to prevent sudden slippage that could cause serious accidents.

Apply force gradually, monitoring for signs of deformation or cracking of parts, which indicates the need to stop and re-evaluate the extraction technique.
Preventive maintenance of extractors extends their lifespan and maintains optimal performance. Lubricate extraction screw threads monthly with anti-seize grease to prevent corrosion and seizing.

Clean the jaws after each use, removing accumulation of oil, swarf, and metallic debris that reduces grip. Inspect the integrity of the jaws and arms weekly, identifying cracks, deformations, or excessive wear that could compromise safety.

Store extractors in dry places protected from humidity, which causes rapid oxidation of steel components. Hydraulic systems require an annual check of the oil level and air bleeding to maintain performance. Replace worn or damaged jaws immediately, as failure during extraction under maximum load presents serious risks.

Polar Industrial Equipment offers a preventive maintenance program and technical training to optimize your safe extraction practices.
Impact Wrenches Pneumatic Tools and Compressors Industrial Lubricants Calipers Vacuum Cleaners Workshop Storage Workbench Vices

We answer your questions about bearing pullers

Which bearing puller is best suited for heavy truck bearings?

For heavy truck bearings, choose hydraulic pullers that deliver a minimum of 15 to 20 tons of force with extra long jaws measuring 300 to 500 mm. This capacity allows you to remove hubs and bearings from 100 to 250 mm that are often seized due to corrosion and winter road salt.

Recommended specifications:

Hydraulic capacity 15 to 30 tons for heavy duty applications

Jaw length 300 to 500 mm for deep hub access

Maximum spread 250 to 400 mm for large diameters

Hydraulic system two speed pump for positioning and extraction

Sunex and OTC pullers provide proven durability for commercial fleets performing 10 to 30 extractions per month. Forged steel construction withstands extreme loads without deformation.

Équipement Industriel Polar recommends complete kits that include adapters for various hub configurations depending on the types of vehicles in your fleet.

How do I remove a seized bearing without damaging the shaft?

To prevent damage, position the jaws under the inner race of the bearing, never on the cage or balls. Apply force gradually while checking centering and ensuring alignment perpendicular to the shaft.

Use penetrating lubricant 24 hours before extraction to reduce required force by 30 to 50 percent.

Recommended procedure:

Clean the extraction area and remove debris and corrosion

Apply penetrating lubricant 12 to 24 hours before removal

Position jaws under the inner race that is tight on the shaft

Apply force gradually while monitoring for signs of deformation

Heat the housing to 80 to 120 degrees Celsius if the bearing is extremely seized

Avoid striking the puller directly as impact can damage threads and jaws. Hydraulic pullers provide superior control of applied force compared to impact methods.

If excessive resistance remains, reassess the technique before continuing to prevent costly damage. Équipement Industriel Polar offers free technical support for complex situations.

What is the difference between manual, mechanical, and hydraulic pullers?

Manual pullers use a simple lever action and generate 500 to 2000 pounds of force, sufficient for small bearings from 10 to 75 mm.

Mechanical screw pullers develop 2 to 10 tons through a threaded screw mechanism for medium size bearings. Hydraulic pullers generate 10 to 30 tons for the most demanding applications with precise pressure control.

Comparison by type:

Manual 500 to 2000 pounds price 20 to 80 dollars occasional use

Mechanical 2 to 10 tons price 150 to 600 dollars versatile regular use

Hydraulic 10 to 30 tons price 600 to 1499 dollars intensive professional use

Operator effort highest with manual lowest with hydraulic

Mechanical pullers offer the best balance for general repair shops performing 5 to 15 extractions per week. Hydraulic systems justify the higher investment for commercial fleets and industrial shops with more than 20 extractions per week requiring maximum productivity.

Équipement Industriel Polar recommends selecting based on workload and required capacity.

How often should I maintain my bearing puller?

Lubricate threads and moving mechanisms monthly for heavy use and quarterly for moderate use.

Clean the jaws after each use to remove oil and metal debris. Visually inspect component integrity weekly to identify cracks or deformation requiring immediate replacement.

Recommended maintenance schedule:

After each use clean jaws and extraction screw

Monthly heavy use complete lubrication and detailed inspection

Quarterly moderate use lubrication and functional check

Annually full overhaul with replacement of worn components

Hydraulic pullers require annual oil level checks and air purging from the system. Replace jaws when wear or deformation exceeds 20 percent as reduced grip compromises safety.

Store in dry areas with a light anti rust protective coating on metal surfaces. Typical service life ranges from 10 to 20 years with proper professional maintenance.

What warranty do you offer on bearing pullers?

Bearing pullers are covered by manufacturer warranties ranging from 1 to 3 years depending on the brand, covering defects in materials and workmanship.

Sunex, OTC, and Powerbuilt typically offer 1 to 2 year warranties on structural components and mechanisms. Jaws and wear parts carry limited warranties from 90 days to 1 year.

Warranty coverage:

Mechanical and hydraulic pullers 1 to 3 years depending on brand

Structural components covered for manufacturing defects and cracking

Jaws and accessories limited warranty 90 days to 1 year

Équipement Industriel Polar policy 30 day return on unused product

For warranty claims, keep your proof of purchase and contact our team at 1 800 567 3206 for eligibility validation. We assist with communication with authorized service centers for repairs.

Damage caused by improper use, overloading, or lack of maintenance is excluded. Free technical support is available to help optimize extraction techniques and prevent premature failure.

CAN'T FIND THE PRODUCT YOU'RE LOOKING FOR?

CONTACT US

Compare /8