Rivet Guns

For steel framing applications, pneumatic or cordless electric riveters delivering a minimum pulling force of 2000 to 2500 lbs are recommended. This capacity is required for 4.8 to 6.4 mm steel rivets, ensuring structural strength compliant with building codes and wind load requirements.

Recommended specifications:

• Pulling force: 2000 to 2500 lbs for heavy duty steel rivets
  
• Rivet capacity: 4.8 to 6.4 mm for structural assemblies
  
• Type: Pneumatic for workshops, cordless for mobile job sites
  
• Battery runtime: 400 to 600 rivets per charge for a full workday
  

DeWalt 20V MAX and Milwaukee M18 FUEL riveters provide excellent mobility without sacrificing power on job sites lacking pneumatic infrastructure. Pneumatic models excel in stationary production environments with higher cycle rates.

Équipement Industriel Polar recommends complete kits including interchangeable nosepieces and assorted rivets for immediate deployment.

Yes. Professional 18V and 20V cordless riveters deliver 1500 to 2500 lbs of pulling force, sufficient for stainless steel rivets up to 5.0 mm in total material thicknesses of 15 to 20 mm. DeWalt,

Milwaukee, and Makita offer models specifically designed for heavy duty stainless applications.

Capabilities by model:

• DeWalt 20V MAX: 1900 lbs, stainless rivets up to 4.8 mm
  
• Milwaukee M18 FUEL: 2500 lbs, stainless rivets up to 5.0 mm
  
• Makita LXT 18V: 1800 lbs, stainless rivets up to 4.8 mm
  
• Battery life: 200 to 400 stainless rivets per 5.0 Ah battery
  

Stainless steel requires approximately 20 percent more force than mild steel of the same diameter. High capacity 5.0 Ah and 6.0 Ah batteries are recommended for intensive projects.

Cordless riveters eliminate air hose constraints, making them ideal for elevated work and confined spaces. Équipement Industriel Polar recommends testing on samples prior to full production to validate performance.

Pneumatic riveters require a minimum of 90 PSI with an airflow of 4 to 6 CFM for optimal performance. Industrial compressors rated 5 to 10 HP with 60 to 120 liter tanks ensure stable pressure during continuous heavy use.

Pneumatic specifications:

• Operating pressure: 90 PSI minimum, 90 to 120 PSI optimal
  
• Required airflow: 4 to 6 CFM depending on riveter capacity
  
• Compressor size: 5 to 10 HP for daily professional use
  
• Hose diameter: Minimum 3/8 inch to reduce pressure loss
  

Insufficient pressure can reduce pulling force by 30 to 50 percent, compromising joint quality and causing partially set mandrels. Ensure the pressure regulator maintains a constant value during riveting cycles.

Undersized compressors lead to frequent cycling and reduced productivity. Daily lubrication with light pneumatic oil prevents internal corrosion and extends service life.

Clean rivet nosepieces weekly to remove metal shavings and debris using a wire brush.

Lubricate pneumatic riveters daily with light oil applied directly into the air inlet. Inspect mandrels monthly and replace any showing excessive wear or deformation.

Recommended maintenance schedule:

• Daily pneumatic: 3 to 5 drops of oil in air inlet
  
• Weekly: Clean nosepieces and perform functional check
  
• Monthly: Inspect mandrels and replace if needed
  
• Quarterly electric: Clean motor housing and inspect contacts
  

Store riveters in dry environments with a light anti rust coating on exposed metal parts. Lithium ion batteries should be stored at 40 to 60 percent charge during extended storage to preserve lifespan.

Replace pneumatic seals immediately upon detecting air leaks, as pressure loss reduces efficiency. Typical service life ranges from 5 to 10 years with proper professional maintenance.

Professional riveters are covered by a 3 year manufacturer warranty from DeWalt, Milwaukee, and Makita covering defects in materials and workmanship.

This warranty includes motors, pulling mechanisms, and housings but excludes wear components such as mandrels and interchangeable nosepieces, which carry separate warranties ranging from 90 days to 1 year.

Warranty coverage:

• Electric tools: 3 years parts and labor major brands
  
• Batteries: Separate 2 to 3 year warranty depending on brand
  
• Accessories: Mandrels and nosepieces covered for 90 days to 1 year
  
• Équipement Industriel Polar policy: 30 day return on unused products
  

For warranty claims, retain proof of purchase and contact our team at 1 800 567 3206 to verify eligibility. We assist with communication with authorized service centers for warranty repairs. Damage caused by misuse, overload, or lack of maintenance is excluded. Free technical support is available to help optimize riveting techniques and prevent premature failures.